Your AC is one of the most important appliances in your home during the summer. If it’s not working properly, it can be frustrating and uncomfortable. Here are some tips on what to do if you’re having AC problems.
Buy A Duct Fan
A duct fan is a type of fan that is installed in your home’s ductwork to improve airflow and cooling. If you’re having problems with your AC, it may be worth purchasing a duct fan to help improve the performance of your system. Here’s how to choose the right one for your needs:
Consider Size
The size of the duct fan you need depends on the size of your home. The are many sizes, from a 6″ duct fan to a 24″ duct fan. Choose the one that is best suited for your home’s size. If your home is less than 1,000 square feet, a small duct fan should be adequate. If your home is larger than 1,000 square feet, you’ll need a larger duct fan.
Consider Speed
The speed of the duct fan is also important to consider. Some fans have a low speed and a high speed, while others only have one speed. Choose the fan with the speed that is best suited for your needs. If you’re looking for a fan to cool your entire home, you’ll need a fan with high speed. If you’re only looking to cool a specific room, you can use a fan with low speed.
Consider Noise
The last thing to consider when choosing a duct fan is the noise level. Some fans are very loud, while others are quieter. Choose the fan that has the noise level that is best suited for your needs. If you’re looking for a fan that you can run at night without disturbing your sleep, a quiet fan is the best choice. Also, if you’re looking for a fan to use throughout the day, one that isn’t as loud will be better.
Clean Out Your AC Unit
If your AC unit is clogged with dirt and dust, it can cause the unit to work harder than it should, which can lead to decreased performance and even damage to the unit. To help improve the performance of your AC, you should clean out the unit regularly. Here’s how to do it:
- Turn off the unit before you begin cleaning. This will help to protect yourself and reduce the risk of damage to your unit.
- Most units have a front panel that can be removed by pulling it straight out. After doing this, you should see the inside of your unit, which has either a coil or a fan.
- Wipe down the inside of your unit to remove any dirt and debris that is clogging up the coils or fan blades. You can use a soft brush or a vacuum cleaner with a small attachment to help clean out the inside.
- After cleaning, turn on your unit and check to see if it is working properly. If it is not, you may need to call a professional to help repair the unit.
Replace the Filter
If you have an AC unit with a filter, you should replace the filter regularly to help improve the performance of your unit. A clogged filter can cause the unit to work harder than it should and can lead to decreased performance and even damage to the unit. Here’s how to replace the filter:
- Turn off the unit before you begin. This will help to protect yourself and reduce the risk of damage to your unit.
- Open the front panel on your unit by pulling it straight off or using a screwdriver to remove screws where necessary. Once the panel is removed, you should see a filter that needs to be replaced.
- Replace the old filter with a new one. Most filters come with instructions on how to properly install them.
- After replacing the filter, turn on your unit and check to see if it is working properly. If it is not, you may need to call a professional to help repair the unit.
Insulate the Ducts
If your ducts are not insulated, you may be losing cooling or heating power due to the escape of air. To help keep the air in your ducts, you should insulate them with insulation tape or sleeves. Here’s how to do it:
- Measure the length and width of each duct. This will help you determine the amount of insulation you’ll need to purchase.
- Purchase insulation. Insulation can be purchased at home improvement stores, hardware stores and some grocery stores.
- Use the insulation tape or sleeves on each duct to insulate them. Be sure to follow manufacturer instructions for installation, since different types of insulation require different methods of insulating.
- After insulating the ducts, turn on your unit and check to see if it is working properly. If it is not, you may need to call a professional to help repair the unit.
Buy a New AC Unit
If your AC unit is too old and still not working properly, you may want to consider purchasing a new one. Here are some factors to consider when buying a new AC unit:
- The size of the unit. You’ll need to choose a unit that is the right size for your home. A unit that is too small will not cool your space sufficiently, while a unit that is too large will work harder than needed. To determine the right size for your home, you’ll need to know the square footage of your home and the number of people who live in it.
- The features you want. If you are looking for an automated option, for instance, one with remote control or a programmable thermostat, you’ll need to choose an AC unit that has those features.
- The type of AC unit. There are two types of AC units: window units and central units. Window units are installed in windows and central units are installed in the attic or basement.
- The price. AC units range in price from around $200 to $3,000.
If your AC unit is not working properly, there are a few things that you can do to try and fix the problem. You can buy a duct fan to improve the airflow and cooling in your home, clean out the AC unit to remove any dirt and debris, call a professional to help repair the unit or buy a new one. Follow these tips to help keep you cool this summer.
