There are many different types of garage door problems a homeowner can encounter with their garage door system. Understanding your situation is extremely important, and getting a Garage Door Repair Raleigh NC to fix it immediately is your best choice.

Types of Problems:

The spring(s) break: This is the most dangerous garage door problem. If this happens, make sure to shut off the power to the opener immediately, as well as open all doors leading out from the inside of your house before even thinking about going near those springs! There is enough pressure behind those springs to kill you instantly if they snap back at you, which they will do if not handled correctly. Garage Door Company is a good option for people who don’t know how to handle springs. You can visit their website at https://www.wefixitgd.com/ to learn more about their services.

There is a grinding sound when you open or close your garage door: This is a widespread problem, especially if the opener hasn’t been lubricated in a while. If this happens, call someone who can do it for you immediately! It’s not very expensive to get done, and not getting it fixed means that the motor (and other parts) are wearing down on each other instead of moving smoothly along these tracks. Can you imagine how much worse this could get?

The garage door shakes when opened/closed: This usually means that your track is bent or otherwise needs to be fixed. Garage Door Repair can fix this quickly and easily for you! All they need to do is bend it back into place and adjust the wheel track.

The garage door is not going up or down: You must be able to open and close your garage door! If it isn’t moving, it could be because of several things. Here are just some of them:

  • Your garage door opener needs to be reprogrammed/fixed
  • Your extension springs need new tension
  • There may be something on the tracks that need to come off
  • The ceiling brackets might not be installed correctly
  • Your cable might have snapped and needed replacing

If you’re experiencing any of these problems, you should call a professional garage door company to come and take a look at your garage door and see what the problem is. Garage door repair services most likely won’t come out to fix the issues with parts that aren’t broken, so they’ll surely be able to give you some advice on how to fix it yourself!

How Much is Garage Door Repair?

The price of garage door repair will depend on the size and number of springs that your garage door has, as well as what type of problem you’re experiencing. 

Extension Springs Replacement: If one spring needs new tension, it will cost around $80 to have this fixed by a professional company. If you need both springs replaced because one broke and threw the other off-balance, expect a bill somewhere in the area of $350 for a fix. Replacing extension springs can cost anywhere between $150-250 dollars depending on how many there are and if they need uniform tension or not. Installing ceiling brackets to keep them from dragging along the ground will only take about 20 minutes and shouldn’t be than $20 for parts and labor.

New Handle and Inner Locking Cylinder Installation: If your garage is equipped with a roller door, you will be dealing with broken springs or a damaged cable most of the time. If one spring needs to be replaced, it should cost just under $100 for this part and labor fix. A new handle and inner locking cylinder can range between $40 and $80, depending on what type you have at the moment. Replacing cables should be only about 20 dollars, but if they are too stripped out or rusty, they may need to be redesigned first, which would take longer than just installing a new one. If you have springs installed in your home to help lift these doors, then expect at least an extra hour added onto the job because of how heavy they are. The springs should cost no more than $50 to install.

Repairing Safety Sensor: If you have a garage door opener that is not working, expect it to be one of two different things. Either the safety sensors are not calibrated correctly, or there is something wrong with the motor itself, requiring you to buy another one and pay for installation costs. You can expect this repair job to last anywhere between $150 and $300 depending on how many lights are flashing when your remote goes off, so if all three stop flashing, then expect to pay around $150, whereas only two stopping would mean you need to spend closer to $200. Not having any light flashing would indicate that the problem lies within either the wiring or circuit board which can take up to an hour of work and cost around $200.